| 符号 | 数值 | 说明 |
|---|---|---|
| ≈m | 0.004 kg | 重量 |
| Cr | 1.560 N | 基本额定动载荷（径向） |
| C0r | 600 N | 基本额定静载荷（径向） |
| Cur | 37,5 N | 疲劳极限载荷（径向） |
| nG | 55.000 1/min | 极限转速 |
| nϑr | 40.000 1/min | 参考转速 |
+82 70-7954-6116
info@kovar.kr
技术支持时间：周一至周五 9:00–18:00（韩国时间）
FAG
FAG 696-2Z Deep Groove Ball Bearings 深沟球轴承 6 × 15 × 5 mm
Deep Groove Ball Bearing
CN¥13.44起
不含税fag:696-2ZCN¥13.44
| 规格 | 价格 | 数量 |
|---|---|---|
| fag:696-2Z | CN¥13.44 |
有库存预计配送日期：2026.06.20（韩国库存）
显示价格为 EX-WORKS（国际贸易术语 2020）韩国首尔。运费、关税及保险由买方承担。
- Category
- 深沟球轴承
- Bore
- 6 mm mm
- Outer Ø
- 15 mm mm
- Width
- 5 mm mm
Overview
FAG 696-2Z Deep Groove Ball Bearing is a versatile rolling bearing for stable, low-friction rotation in a wide range of industrial equipment. It primarily supports radial load while accommodating moderate axial load in both directions, making it a standard choice for motors, pumps, gearboxes, and general machinery.
The bearing consists of inner and outer rings with deep raceway grooves, balls, and a cage. Open, shielded, or sealed designs can be selected according to contamination, lubrication, and maintenance requirements.
Key features
- Highly versatile standard bearing type
- Low friction and stable high-speed rotation
- Supports radial load and moderate bidirectional axial load
- Available in open, shielded, and sealed designs
Typical applications
- Electric motors and generators
- Pumps, fans, and blowers
- Gearboxes and reducers
- Conveyors and general industrial machinery
Selection guidance
Select by bore, outside diameter, width, sealing type, internal clearance, speed rating, and actual radial/axial load conditions.
| 符号 | 数值 | 说明 |
|---|---|---|
| d | 6 mm | 内径 |
| D | 15 mm | 外径 |
| B | 5 mm | 宽度 |
| r1, 2 min | 0,2 mm | 最小倒角尺寸 |
| D1 | 12,5 mm | Shoulder diameter, outer ring |
| d1 | 8,6 mm | Shoulder diameter, inner ring |
| 符号 | 数值 | 说明 |
|---|---|---|
| da min | 7,4 mm | Min. shoulder diameter for mounting, inner ring |
| Da max | 13,6 mm | Max. shoulder diameter for mounting, housing |
| ra max | 0,2 mm | Max. fillet radius |
| 符号 | 数值 | 说明 |
|---|---|---|
| Tmin | -30 °C | 最低工作温度 |
| Tmax | 120 °C | 最高工作温度 |
| 代码 | 说明 |
|---|---|
| 2Z | Sealing type |
| JN | Cage |
| PN | Tolerance class |
| Lubricating grease | Lubricant |
| CN (Group N) | Radial clearance group |
| Z | Bore type |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
6962Z696 2Z696FAG6962ZFAG 696 2ZFAG696 2ZFAG 6962ZFAG696
