| 符号 | 数值 | 说明 |
|---|---|---|
| d | 35 mm | 内径 |
| H | 135 mm | 法兰高度 |
| U | 36,4 mm | 单元总高度 |
| Cr | 27.500 N | 基本额定动载荷（径向） |
| C0r | 15.300 N | 基本额定静载荷（径向） |
| Cur | 800 N | 疲劳极限载荷（径向） |
| ≈m | 1,734 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技术支持时间：周一至周五 9:00–18:00（韩国时间）
FAG
FAG UCFC207-J7 法兰轴承座
Flanged Housing Unit
CN¥92.51起
不含税fag:UCFC207-J7CN¥92.51
| 规格 | 价格 | 数量 |
|---|---|---|
| fag:UCFC207-J7 | CN¥92.51 |
有库存预计配送日期：2026.06.16（韩国库存）
显示价格为 EX-WORKS（国际贸易术语 2020）韩国首尔。运费、关税及保险由买方承担。
- Category
- 法兰轴承座
Overview
FAG UCFC207-J7 Flanged Housing Unit is a ready-to-mount bearing unit combining an insert bearing with a flanged housing. It bolts to machine side frames to support shafts and is well suited to conveyors, fans, and agri-food equipment where installation and replacement speed matter.
A radial insert ball bearing is matched with a cast iron or sheet steel housing. Two-bolt, four-bolt, and round flange styles can be selected according to mounting space and load direction.
Key features
- Easy bolt-on mounting with flanged housing
- Ready-to-fit matched bearing and housing
- Misalignment compensation and sealing protection
- Ideal for side-frame shaft supports
Typical applications
- Conveyor side supports
- Fan and blower frames
- Agricultural and food processing equipment
- Packaging and handling systems
Selection guidance
Verify flange style, bolt pitch, shaft diameter, housing material, seal specification, and relubrication method.
| 符号 | 数值 | 说明 |
|---|---|---|
| A | 26 mm | 外壳高度 |
| A1 | 9 mm | 法兰厚度 |
| A2 | 11 mm | 滚道间距 |
| B | 42,9 mm | 宽度 |
| Q | M6 | 润滑连接螺纹 |
| 项目 | 代码 | 说明 |
|---|---|---|
| 材质 | GG | 灰口铸铁 |
| 符号 | 数值 | 说明 |
|---|---|---|
| J | 110 mm | 节圆直径（孔） |
| N | 14 mm | 固定孔 |
| N1 | 77,8 mm | 固定孔间距 |
| T1 | 8 mm | Height spigot |
| Z | 90 mm | Diameter spigot |
| h8 | Diameter spigot clearance | |
| n | 4 | 螺孔数量 |
| 符号 | 数值 | 说明 |
|---|---|---|
| Tmin | -20 °C | 最低工作温度 |
| Tmax | 120 °C | 最高工作温度 |
| 代码 | 说明 |
|---|---|
| 1 | 外壳数量 |
| FC207 | 外壳 |
| UCFC207 | 轴承代号 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCFC207J7UCFC207 J7UCFC207FAGUCFC207J7FAG UCFC207 J7FAGUCFC207 J7FAG UCFC207J7FAGUCFC207
