| 符号 | 数值 | 说明 |
|---|---|---|
| d | 55 mm | 内径 |
| L | 219 mm | 总长度 |
| H2 | 126 mm | 高度 |
| Cr | 46.000 N | 基本额定动载荷（径向） |
| C0r | 29.000 N | 基本额定静载荷（径向） |
| Cur | 1.520 N | 疲劳极限载荷（径向） |
| ≈m | 3,392 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技术支持时间：周一至周五 9:00–18:00（韩国时间）
FAG
FAG UCP211-J7 立式轴承座
Plummer block housing unit
Pillow Block Housing Unit
CN¥141.49起
不含税fag:UCP211-J7CN¥141.49
| 规格 | 价格 | 数量 |
|---|---|---|
| fag:UCP211-J7 | CN¥141.49 |
有库存预计配送日期：2026.06.16（韩国库存）
显示价格为 EX-WORKS（国际贸易术语 2020）韩国首尔。运费、关税及保险由买方承担。
- Category
- 立式轴承座
Overview
FAG UCP211-J7 Pillow Block Housing Unit is a base-mounted bearing unit with an insert bearing assembled in a housing. It bolts onto flat frames and is widely used for horizontal shaft support in conveyors, fans, agricultural machines, and packaging equipment.
The unit combines a cast iron or sheet steel base housing with a radial insert ball bearing. The spherical fit between bearing and housing compensates for static misalignment, while seals reduce contamination ingress.
Key features
- Ready-to-fit base-mounted unit
- Suitable for horizontal shaft support
- Misalignment-compensating structure
- Easy replacement and lubrication maintenance
Typical applications
- Conveyor drive shafts
- Fans and blowers
- Agricultural and food machinery
- Packaging and logistics handling equipment
Selection guidance
Verify shaft diameter, base bolt spacing, housing material, locking method, seal, and grease nipple specification.
| 符号 | 数值 | 说明 |
|---|---|---|
| H | 63,5 mm | 轴心距 |
| A | 60 mm | Width (base) |
| H1 | 23 mm | Height (base) |
| B | 55,6 mm | 宽度 |
| S1 | 33,4 mm | 滚道至锁紧环距离 |
| Q | M6 | 润滑连接螺纹 |
| 项目 | 代码 | 说明 |
|---|---|---|
| 材质 | GG | 灰口铸铁 |
| 外壳间隙 | J7 | Normal swivel torque |
| 符号 | 数值 | 说明 |
|---|---|---|
| J | 171 mm | 固定孔间距 |
| N | 20 mm | 宽度（槽） |
| N1 | 25 mm | 长度（槽） |
| 符号 | 数值 | 说明 |
|---|---|---|
| Tmin | -20 °C | 最低工作温度 |
| Tmax | 120 °C | 最高工作温度 |
| 代码 | 说明 |
|---|---|
| P211 | 外壳 |
| UC211 | 轴承代号 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCP211J7UCP211 J7UCP211FAGUCP211J7FAG UCP211 J7FAGUCP211 J7FAG UCP211J7FAGUCP211
