| 符号 | 数值 | 说明 |
|---|---|---|
| ≈m | 6.59 kg | 重量 |
| Cr | 66.000 N | 基本额定动载荷（径向） |
| C0r | 44.500 N | 基本额定静载荷（径向） |
| Cur | 2.300 N | 疲劳极限载荷（径向） |
+82 70-7954-6116
info@kovar.kr
技术支持时间：周一至周五 9:00–18:00（韩国时间）
FAG
FAG UCP215-48-J7 Plummer Block Housing Units 立式轴承座
Plummer Block Housing Units
Pillow Block Housing Unit
CN¥997.10起
不含税fag:UCP215-48-J7CN¥997.10
| 规格 | 价格 | 数量 |
|---|---|---|
| fag:UCP215-48-J7 | CN¥997.10 |
有库存预计配送日期：2026.06.17（韩国库存）
显示价格为 EX-WORKS（国际贸易术语 2020）韩国首尔。运费、关税及保险由买方承担。
- Category
- 立式轴承座
- Bore
- 76.2 mm mm
- Width
- 163 mm mm
Overview
FAG UCP215-48-J7 Pillow Block Housing Unit is a base-mounted bearing unit with an insert bearing assembled in a housing. It bolts onto flat frames and is widely used for horizontal shaft support in conveyors, fans, agricultural machines, and packaging equipment.
The unit combines a cast iron or sheet steel base housing with a radial insert ball bearing. The spherical fit between bearing and housing compensates for static misalignment, while seals reduce contamination ingress.
Key features
- Ready-to-fit base-mounted unit
- Suitable for horizontal shaft support
- Misalignment-compensating structure
- Easy replacement and lubrication maintenance
Typical applications
- Conveyor drive shafts
- Fans and blowers
- Agricultural and food machinery
- Packaging and logistics handling equipment
Selection guidance
Verify shaft diameter, base bolt spacing, housing material, locking method, seal, and grease nipple specification.
| 符号 | 数值 | 说明 |
|---|---|---|
| d | 76.2 mm | 内径 |
| B | 163 mm | 宽度 |
| 符号 | 数值 | 说明 |
|---|---|---|
| Tmin | -20 °C | 最低工作温度 |
| Tmax | 120 °C | 最高工作温度 |
| 代码 | 说明 |
|---|---|
| GG | Material |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCP21548J7UCP215 48 J7UCP21548 J7UCP215 48J7UCP215UCP21548FAGUCP21548J7FAG UCP215 48 J7FAGUCP215 48 J7FAGUCP21548 J7FAG UCP21548J7FAG UCP215 48J7
