| 符号 | 数值 | 说明 |
|---|---|---|
| d | 35 mm | 内径 |
| H | 102 mm | 高度 |
| L | 129 mm | 总长度 |
| C0r | 15.300 N | 基本额定静载荷（径向） |
| Cur | 800 N | 疲劳极限载荷（径向） |
| Cr | 27.500 N | 基本额定动载荷（径向） |
| ≈m | 1,608 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技术支持时间：周一至周五 9:00–18:00（韩国时间）
FAG
FAG UCT207-J7 张紧式轴承座
Take-up Housing Unit
CN¥92.51起
不含税fag:UCT207-J7CN¥92.51
| 规格 | 价格 | 数量 |
|---|---|---|
| fag:UCT207-J7 | CN¥92.51 |
有库存预计配送日期：2026.06.16（韩国库存）
显示价格为 EX-WORKS（国际贸易术语 2020）韩国首尔。运费、关税及保险由买方承担。
- Category
- 张紧式轴承座
Overview
FAG UCT207-J7 Take-up Housing Unit is a bearing unit that allows shaft position adjustment to control belt or chain tension. It combines shaft support and tensioning functions for conveyors, elevators, and handling systems, simplifying field maintenance.
An insert bearing is assembled in a sliding housing and used with a frame or take-up device. Moving the shaft forward or backward adjusts belt tension and alignment.
Key features
- Shaft position adjustment for tension control
- Integrated bearing support and take-up function
- Improves conveyor maintenance
- Misalignment-compensating structure
Typical applications
- Belt conveyors
- Chain conveyors
- Bucket elevators
- Packaging and logistics handling systems
Selection guidance
Check shaft diameter, housing slot dimensions, adjustment range, locking method, seal, and lubrication condition.
| 符号 | 数值 | 说明 |
|---|---|---|
| L1 | 78 mm | 轴心距 |
| L2 | 13 mm | Length fixed link |
| L3 | 64 mm | Length guidance groove |
| A | 37 mm | Width housing fixing side |
| N1 | 16 mm | Width recess |
| N2 | 37 mm | Height recess |
| B | 42,9 mm | 内圈宽度 |
| S1 | 25,4 mm | 滚道至锁紧环距离 |
| T | 64 mm | Height housing fixing side |
| Q | M6 | 润滑连接螺纹 |
| A2 | 30 mm | Width housing |
| 项目 | 代码 | 说明 |
|---|---|---|
| 材质 | GG | 灰口铸铁 |
| 符号 | 数值 | 说明 |
|---|---|---|
| A1 | 12 mm | Width guidance groove |
| 0,2 mm | Upper width guidance groove tolerance | |
| 0 mm | Lower width guidance groove tolerance | |
| H1 | 89 mm | Distance guidance grooves |
| 0 mm | Upper distance guidance groove tolerance | |
| -0,5 mm | Lower distance guidance groove tolerance | |
| N | 22 mm | 固定孔 |
| 符号 | 数值 | 说明 |
|---|---|---|
| Tmin | -20 °C | 最低工作温度 |
| Tmax | 120 °C | 最高工作温度 |
| 代码 | 说明 |
|---|---|
| T207 | 外壳 |
| UC207 | 轴承代号 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCT207J7UCT207 J7UCT207FAGUCT207J7FAG UCT207 J7FAGUCT207 J7FAG UCT207J7FAGUCT207
