| 符號 | 數值 | 說明 |
|---|---|---|
| ≈m | 1.425 kg | 重量 |
| Cr | 123.000 N | 基本額定動負荷（徑向） |
| C0r | 122.000 N | 基本額定靜負荷（徑向） |
| Cur | 8.800 N | 疲勞極限負荷（徑向） |
| nG | 10.200 1/min | 極限轉速 |
| nϑr | 4.550 1/min | 參考轉速 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
FAG
FAG QJ215-XL-N2-MPA-F59-C4 Four-Point Contact Ball Bearings 四點接觸球軸承 75 × 130 × 25 mm
Four-Point Contact Ball Bearing
NT$7,755.81起
未稅fag:QJ215-XL-N2-MPA-F59-C4NT$7,755.81
| 規格 | 價格 | 數量 |
|---|---|---|
| fag:QJ215-XL-N2-MPA-F59-C4 | NT$7,755.81 |
有庫存預計配送日期：2026.06.16（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 四點接觸球軸承
- Bore
- 75 mm mm
- Outer Ø
- 130 mm mm
- Width
- 25 mm mm
Overview
FAG QJ215-XL-N2-MPA-F59-C4 Four-Point Contact Ball Bearing is a compact angular contact design that can support axial load in both directions and a portion of radial load in a single bearing. It suits gearboxes, cranes, and rotary tables where axial space saving and shaft location are required.
A split inner ring or specially shaped raceway allows the balls to contact at four points. It can replace certain paired angular contact arrangements while reducing axial width.
Key features
- Supports bidirectional axial load
- Saves axial installation space
- Separable design improves mountability
- Suitable for locating bearing positions
Typical applications
- Industrial gearboxes
- Cranes and hoists
- Rotary tables
- Pump and compressor shaft supports
Selection guidance
Confirm axial load dominance, radial load ratio, speed, internal clearance, and the companion bearing arrangement.
| 符號 | 數值 | 說明 |
|---|---|---|
| d | 75 mm | 內徑 |
| D | 130 mm | 外徑 |
| B | 25 mm | 寬度 |
| r1, 2 min | 1,5 mm | 最小倒角尺寸 |
| D1 | 111,5 mm | Shoulder diameter, outer ring |
| d1 | 93,86 mm | Shoulder diameter, inner ring |
| 符號 | 數值 | 說明 |
|---|---|---|
| da min | 84 mm | Min. shoulder diameter for mounting, inner ring |
| Da max | 121 mm | Max. shoulder diameter for mounting, housing |
| ra max | 1,5 mm | Max. fillet radius |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -30 °C | 最低工作溫度 |
| Tmax | 150 °C | 最高工作溫度 |
| 代碼 | 說明 |
|---|---|
| MPA | Cage |
| PN | Tolerance class |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
QJ215XLN2MPAF59C4QJ215 XL N2 MPA F59 C4QJ215XL N2 MPA F59 C4QJ215XLN2 MPA F59 C4QJ215XLN2MPA F59 C4QJ215XLN2MPAF59 C4QJ215 XLN2MPAF59C4QJ215 XL N2MPAF59C4QJ215 XL N2 MPAF59C4QJ215 XL N2 MPA F59C4QJ215QJ215XL
