SKF 3309 DNRCBM Angular Contact Ball Bearing 45 × 100 × 39.7 mm

Double row angular contact ball bearing with snap ring and split inner ring

Angular Contact Ball Bearing

RFQ

Restocking soon · Inquire

EX-WORKS (Incoterms 2020) Seoul, Korea — Buyer arranges freight, duties, and insurance.

Category: Angular Contact Ball Bearing
Dimensions: 45x100x39.7mm

Overview

Double row angular contact ball bearing with snap ring and split inner ring

Double row angular contact ball bearings, with snap ring and split inner ring, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement. The snap ring, fitted in an annular groove in the outer ring, facilitates axial location of the bearings within their housings. The split inner ring enables incorporation of more balls, resulting in higher load carrying capacity.

Key features

Snap ring facilitates axial location within housing
Accommodate very high axial loads in both directions, radial loads, and tilting moments
Suitable where a stiff bearing arrangement is required
Require less axial space than equivalent pair of single row angular contact ball bearings

Typical applications

Machine tool spindles and support shafts
Pumps and compressors
High-speed motors
Precision gearboxes and robot drives

Selection guidance

Select by contact angle, arrangement, preload, precision class, axial load direction, and operating speed.

Symbol	Value	Description
C	61.8 kN	Basic dynamic load rating
C0	52 kN	Basic static load rating
reference_speed_rpm	7 500 r/min	Reference speed
limiting_speed_rpm	6 300 r/min	Limiting speed

Symbol	Value	Description
d	45 mm	Bore diameter
D	100 mm	Outside diameter
B	39.7 mm	Width
α	40 °	Contact angle

Symbol	Value	Description
da	min. 54 mm	da
ra	max. 1.5 mm	ra

Snap ring allows easy axial location in the housing
Accommodates very high axial and radial loads and tilting moments in both directions
Suitable where a strong bearing arrangement is required
Requires less axial space than a corresponding pair of single-row angular contact ball bearings

Code	Description
접촉 유형	Normal contact (four-point contact)
열 개수	2
로케이팅 기능, 베어링 외륜	Snap ring (mounted)
링 유형	Two-piece inner ring and one-piece outer ring
케이지	Machined brass
접촉각 배열(복열 베어링)	Back-to-back (O)
일치된 배열	No
유니버설 매칭 베어링	No
축방향 내부틈새	CB
소재, 베어링	Bearing steel
코팅	None
씰링	None
윤활유	None
재윤활 기능	None
제품 순 중량	1.51 kg
eClass 코드	23-05-08-03
UNSPSC 코드	31171531

datasheet pdf download

Also searched as

The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page: