| 記号 | 値 | 説明 |
|---|---|---|
| ≈m | 0.032 kg | 質量 |
+82 70-7954-6116
info@kovar.kr
技術サポート対応時間：月〜金 9:00〜18:00（韓国時間）
FAG
FAG MB14 Retainers ロックリング 70 × 98 × 8 mm
Retainers
Lock Ring
JP¥507～
税別fag:MB14JP¥507
| 仕様 | 価格 | 数量 |
|---|---|---|
| fag:MB14 | JP¥507 |
在庫あり配送予定日：2026.06.16（国内在庫）
表示価格はEX-WORKS（インコタームズ2020）韓国・ソウル渡しです。輸送費・関税・保険は買主負担となります。
- Category
- ロックリング
- Bore
- 70 mm mm
- Outer Ø
- 98 mm mm
- Width
- 8 mm mm
Overview
Lock rings and spacer washers are precision hardened-steel parts that axially position a bearing on its shaft or in its housing. Tab washers (MB and MBL series), plain spacer rings, and stabilizing rings absorb the tolerance stack-up between the bearing, the shoulder, and the retaining nut and prevent the bearing from drifting axially in service.
Common forms include MB / MBL tab washers paired with KM / HM lock nuts, plain spacer rings cut to precise thickness, and stabilizing rings with a keyed inside diameter. All are case-hardened for fatigue resistance against the rotating inner ring face.
Key features
- Precision-ground thickness for exact axial positioning
- Case-hardened steel to resist fretting against bearing ring
- Matched to specific bearing series or housing bore
- Many are consumables — replaced every time the bearing is serviced
Typical applications
- Axial clamping of tapered-bore bearings on adapter sleeves
- Stack-up spacing in multi-bearing shaft arrangements
- Retention of inner race against shaft shoulder
- Replacement of worn original-kit hardware during overhaul
Selection guidance
Identify by bearing part number and position (inboard / outboard) — dimensions and hardness class must match the bearing manufacturer's assembly drawing.
| 記号 | 値 | 説明 |
|---|---|---|
| d | 70 mm | 内径 |
| D | 98 mm | 外径 |
| B | 8 mm | 幅 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
FAGMB14FAG MB14
