| 符號 | 數值 | 說明 |
|---|---|---|
| ≈m | 0.185 kg | 重量 |
| Cr | 17.800 N | 基本額定動負荷（徑向） |
| C0r | 11.500 N | 基本額定靜負荷（徑向） |
| Cur | 600 N | 疲勞極限負荷（徑向） |
| nG | 14.600 1/min | 極限轉速 |
| nϑr | 10.600 1/min | 參考轉速 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
FAG
FAG 6008ZR Deep Groove Ball Bearings 深溝球軸承 40 × 68 × 15 mm
Deep Groove Ball Bearing
NT$82.31起
未稅fag:6008ZRNT$82.31
| 規格 | 價格 | 數量 |
|---|---|---|
| fag:6008ZR | NT$82.31 |
有庫存預計配送日期：2026.06.15（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 深溝球軸承
- Bore
- 40 mm mm
- Outer Ø
- 68 mm mm
- Width
- 15 mm mm
Overview
FAG 6008ZR Deep Groove Ball Bearing is a versatile rolling bearing for stable, low-friction rotation in a wide range of industrial equipment. It primarily supports radial load while accommodating moderate axial load in both directions, making it a standard choice for motors, pumps, gearboxes, and general machinery.
The bearing consists of inner and outer rings with deep raceway grooves, balls, and a cage. Open, shielded, or sealed designs can be selected according to contamination, lubrication, and maintenance requirements.
Key features
- Highly versatile standard bearing type
- Low friction and stable high-speed rotation
- Supports radial load and moderate bidirectional axial load
- Available in open, shielded, and sealed designs
Typical applications
- Electric motors and generators
- Pumps, fans, and blowers
- Gearboxes and reducers
- Conveyors and general industrial machinery
Selection guidance
Select by bore, outside diameter, width, sealing type, internal clearance, speed rating, and actual radial/axial load conditions.
| 符號 | 數值 | 說明 |
|---|---|---|
| d | 40 mm | 內徑 |
| D | 68 mm | 外徑 |
| B | 15 mm | 寬度 |
| r1, 2 min | 1 mm | 最小倒角尺寸 |
| D1 | 59,06 mm | Shoulder diameter, outer ring |
| d1 | 49,3 mm | Shoulder diameter, inner ring |
| 符號 | 數值 | 說明 |
|---|---|---|
| da min | 44,6 mm | Min. shoulder diameter for mounting, inner ring |
| Da max | 63,4 mm | Max. shoulder diameter for mounting, housing |
| ra max | 1 mm | Max. fillet radius |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -30 °C | 最低工作溫度 |
| Tmax | 120 °C | 最高工作溫度 |
| 代碼 | 說明 |
|---|---|
| Z | Sealing type |
| JN | Cage |
| PN | Tolerance class |
| Without | Lubricant |
| CN (Group N) | Radial clearance group |
| Z | Bore type |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
FAG6008ZRFAG 6008ZR
