| 符號 | 數值 | 說明 |
|---|---|---|
| ≈m | 3.2 kg | 重量 |
| Cr | 116.000 N | 基本額定動負荷（徑向） |
| C0r | 82.000 N | 基本額定靜負荷（徑向） |
| Cur | 4.800 N | 疲勞極限負荷（徑向） |
| nG | 6.900 1/min | 極限轉速 |
| nϑr | 4.950 1/min | 參考轉速 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
FAG
FAG 7024MP-UA Angular Contact Ball Bearings 角接觸球軸承 120 × 180 × 28 mm
Angular Contact Ball Bearing
詢價
即將補貨 · 諮詢
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 角接觸球軸承
- Bore
- 120 mm mm
- Outer Ø
- 180 mm mm
- Width
- 28 mm mm
Overview
FAG 7024MP-UA Angular Contact Ball Bearing supports combined radial and one-direction axial load through a defined contact angle. It is a high-speed, high-precision choice for pumps, compressors, machine tools, and spindle-related positions where axial rigidity and rotational accuracy matter.
The inner and outer ring raceways are offset to create a contact angle. Single-row, double-row, or matched arrangements can be used to meet axial load direction, preload, and rigidity requirements.
Key features
- Supports combined radial and one-direction axial load
- High-speed and high-accuracy operation
- Preload and rigidity adjustable through matched mounting
- Suitable for precision rotating assemblies
Typical applications
- Machine tool spindles and support shafts
- Pumps and compressors
- High-speed motors
- Precision gearboxes and robot drives
Selection guidance
Select by contact angle, arrangement, preload, precision class, axial load direction, and operating speed.
| 符號 | 數值 | 說明 |
|---|---|---|
| d | 120 mm | 內徑 |
| D | 180 mm | 外徑 |
| B | 28 mm | 寬度 |
| r1, 2 min | 2,1 mm | 最小倒角尺寸 |
| D1 | 146,72 mm | Shoulder diameter, outer ring |
| d1 | 118,66 mm | Shoulder diameter, inner ring |
| 符號 | 數值 | 說明 |
|---|---|---|
| da min | 107 mm | Min. shoulder diameter for mounting, inner ring |
| Da max | 158 mm | Max. shoulder diameter for mounting, housing |
| ra max | 2,1 mm | Max. fillet radius |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -30 °C | 最低工作溫度 |
| Tmax | 150 °C | 最高工作溫度 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
7024MPUA7024MP UA7024MPFAG7024MPUAFAG 7024MP UAFAG7024MP UAFAG 7024MPUAFAG7024MP
