| 符號 | 數值 | 說明 |
|---|---|---|
| d | 40 mm | 內徑 |
| H | 145 mm | 法蘭高度 |
| U | 41,2 mm | 單元總高度 |
| Cr | 34.500 N | 基本額定動負荷（徑向） |
| C0r | 19.800 N | 基本額定靜負荷（徑向） |
| Cur | 840 N | 疲勞極限負荷（徑向） |
| ≈m | 2,079 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
FAG
FAG UCFC208-J7 法蘭軸承座
Flanged Housing Unit
NT$489.24起
未稅fag:UCFC208-J7NT$489.24
| 規格 | 價格 | 數量 |
|---|---|---|
| fag:UCFC208-J7 | NT$489.24 |
有庫存預計配送日期：2026.06.16（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 法蘭軸承座
Overview
FAG UCFC208-J7 Flanged Housing Unit is a ready-to-mount bearing unit combining an insert bearing with a flanged housing. It bolts to machine side frames to support shafts and is well suited to conveyors, fans, and agri-food equipment where installation and replacement speed matter.
A radial insert ball bearing is matched with a cast iron or sheet steel housing. Two-bolt, four-bolt, and round flange styles can be selected according to mounting space and load direction.
Key features
- Easy bolt-on mounting with flanged housing
- Ready-to-fit matched bearing and housing
- Misalignment compensation and sealing protection
- Ideal for side-frame shaft supports
Typical applications
- Conveyor side supports
- Fan and blower frames
- Agricultural and food processing equipment
- Packaging and handling systems
Selection guidance
Verify flange style, bolt pitch, shaft diameter, housing material, seal specification, and relubrication method.
| 符號 | 數值 | 說明 |
|---|---|---|
| A | 26 mm | 外殼高度 |
| A1 | 9 mm | 法蘭厚度 |
| A2 | 11 mm | 滾道間距 |
| B | 49,2 mm | 寬度 |
| Q | M6 | 潤滑連接螺紋 |
| 項目 | 代碼 | 說明 |
|---|---|---|
| 材質 | GG | 灰口鑄鐵 |
| 符號 | 數值 | 說明 |
|---|---|---|
| J | 120 mm | 節圓直徑（孔） |
| N | 14 mm | 固定孔 |
| N1 | 84,8 mm | 固定孔間距 |
| T1 | 10 mm | Height spigot |
| Z | 100 mm | Diameter spigot |
| h8 | Diameter spigot clearance | |
| n | 4 | 螺孔數量 |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -20 °C | 最低工作溫度 |
| Tmax | 120 °C | 最高工作溫度 |
| 代碼 | 說明 |
|---|---|
| 1 | 外殼數量 |
| FC208 | 外殼 |
| UC208 | 軸承代號 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCFC208J7UCFC208 J7UCFC208FAGUCFC208J7FAG UCFC208 J7FAGUCFC208 J7FAG UCFC208J7FAGUCFC208
