| 符號 | 數值 | 說明 |
|---|---|---|
| ≈m | 2.21 kg | 重量 |
| Cr | 34.500 N | 基本額定動負荷（徑向） |
| C0r | 20.400 N | 基本額定靜負荷（徑向） |
| Cur | 1.060 N | 疲勞極限負荷（徑向） |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
FAG
FAG UCP209-28-J7 Plummer Block Housing Units 立式軸承座
Plummer Block Housing Units
Pillow Block Housing Unit
NT$1,061.69起
未稅fag:UCP209-28-J7NT$1,061.69
| 規格 | 價格 | 數量 |
|---|---|---|
| fag:UCP209-28-J7 | NT$1,061.69 |
有庫存預計配送日期：2026.06.17（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 立式軸承座
- Bore
- 44.45 mm mm
- Width
- 106 mm mm
Overview
FAG UCP209-28-J7 Pillow Block Housing Unit is a base-mounted bearing unit with an insert bearing assembled in a housing. It bolts onto flat frames and is widely used for horizontal shaft support in conveyors, fans, agricultural machines, and packaging equipment.
The unit combines a cast iron or sheet steel base housing with a radial insert ball bearing. The spherical fit between bearing and housing compensates for static misalignment, while seals reduce contamination ingress.
Key features
- Ready-to-fit base-mounted unit
- Suitable for horizontal shaft support
- Misalignment-compensating structure
- Easy replacement and lubrication maintenance
Typical applications
- Conveyor drive shafts
- Fans and blowers
- Agricultural and food machinery
- Packaging and logistics handling equipment
Selection guidance
Verify shaft diameter, base bolt spacing, housing material, locking method, seal, and grease nipple specification.
| 符號 | 數值 | 說明 |
|---|---|---|
| d | 44.45 mm | 內徑 |
| B | 106 mm | 寬度 |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -20 °C | 最低工作溫度 |
| Tmax | 120 °C | 最高工作溫度 |
| 代碼 | 說明 |
|---|---|
| GG | Material |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCP20928J7UCP209 28 J7UCP20928 J7UCP209 28J7UCP209UCP20928FAGUCP20928J7FAG UCP209 28 J7FAGUCP209 28 J7FAGUCP20928 J7FAG UCP20928J7FAG UCP209 28J7
