| 符號 | 數值 | 說明 |
|---|---|---|
| d | 30 mm | 內徑 |
| H | 102 mm | 高度 |
| L | 113 mm | 總長度 |
| C0r | 11.300 N | 基本額定靜負荷（徑向） |
| Cur | 590 N | 疲勞極限負荷（徑向） |
| Cr | 20.700 N | 基本額定動負荷（徑向） |
| ≈m | 1,299 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
FAG
FAG UCT206-J7 張緊式軸承座
Take-up Housing Unit
NT$328.26起
未稅fag:UCT206-J7NT$328.26
| 規格 | 價格 | 數量 |
|---|---|---|
| fag:UCT206-J7 | NT$328.26 |
有庫存預計配送日期：2026.06.16（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 張緊式軸承座
Overview
FAG UCT206-J7 Take-up Housing Unit is a bearing unit that allows shaft position adjustment to control belt or chain tension. It combines shaft support and tensioning functions for conveyors, elevators, and handling systems, simplifying field maintenance.
An insert bearing is assembled in a sliding housing and used with a frame or take-up device. Moving the shaft forward or backward adjusts belt tension and alignment.
Key features
- Shaft position adjustment for tension control
- Integrated bearing support and take-up function
- Improves conveyor maintenance
- Misalignment-compensating structure
Typical applications
- Belt conveyors
- Chain conveyors
- Bucket elevators
- Packaging and logistics handling systems
Selection guidance
Check shaft diameter, housing slot dimensions, adjustment range, locking method, seal, and lubrication condition.
| 符號 | 數值 | 說明 |
|---|---|---|
| L1 | 70 mm | 軸心距 |
| L2 | 10 mm | Length fixed link |
| L3 | 57 mm | Length guidance groove |
| A | 37 mm | Width housing fixing side |
| N1 | 16 mm | Width recess |
| N2 | 37 mm | Height recess |
| B | 38,1 mm | 內圈寬度 |
| S1 | 22,2 mm | 滾道至鎖緊環距離 |
| T | 56 mm | Height housing fixing side |
| Q | M6 | 潤滑連接螺紋 |
| A2 | 28 mm | Width housing |
| 項目 | 代碼 | 說明 |
|---|---|---|
| 材質 | GG | 灰口鑄鐵 |
| 符號 | 數值 | 說明 |
|---|---|---|
| A1 | 12 mm | Width guidance groove |
| 0,2 mm | Upper width guidance groove tolerance | |
| 0 mm | Lower width guidance groove tolerance | |
| H1 | 89 mm | Distance guidance grooves |
| 0 mm | Upper distance guidance groove tolerance | |
| -0,5 mm | Lower distance guidance groove tolerance | |
| N | 22 mm | 固定孔 |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -20 °C | 最低工作溫度 |
| Tmax | 120 °C | 最高工作溫度 |
| 代碼 | 說明 |
|---|---|
| T206 | 外殼 |
| UC206 | 軸承代號 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
UCT206J7UCT206 J7UCT206FAGUCT206J7FAG UCT206 J7FAGUCT206 J7FAG UCT206J7FAGUCT206
