| 符號 | 數值 | 說明 |
|---|---|---|
| d | 30 mm | 軸承內徑 |
| Cr | 165.000 N | 基本額定動負荷（徑向） |
| D | 47 mm | 軸承外徑 |
| B | 22 mm | 內圈寬度 |
| C | 18 mm | Width Outer ring |
| C0r | 275.000 N | 基本額定靜負荷（徑向） |
| ≈m | 0,136 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
INA
INA GE30-UK-2RS-A 關節軸承
Plain Bearings
Spherical Plain Bearing
NT$1,041.61起
未稅ina:GE30-UK-2RS-ANT$1,041.61
| 規格 | 價格 | 數量 |
|---|---|---|
| ina:GE30-UK-2RS-A | NT$1,041.61 |
有庫存預計配送日期：2026.06.17（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 關節軸承
Overview
INA GE30-UK-2RS-A Spherical Plain Bearing is a sliding-contact bearing that allows oscillating motion and misalignment. It supports high radial and changing-direction loads, making it suitable for hydraulic cylinders, linkages, construction machinery, and agricultural joints.
A spherical inner ring slides against a matching spherical outer ring. Maintenance-required, maintenance-free, and sealed designs can be selected according to load, speed, and service conditions.
Key features
- Suitable for oscillating and tilting motion
- Allows misalignment
- High static load capacity
- Maintenance-required and maintenance-free options
Typical applications
- Hydraulic cylinder rod ends
- Construction machinery linkages
- Agricultural joints
- Industrial pivot structures
Selection guidance
Check load direction, oscillation angle, relubrication access, sealing need, ring material, and mounting dimensions.
| 符號 | 數值 | 說明 |
|---|---|---|
| dK | 40,7 mm | Ball diameter |
| α | 6 ° | Tilt angle |
| DOT | 0 mm | Outside diameter, upper tolerance |
| DUT | -0,011 mm | Outside diameter, lower tolerance |
| BOT | 0 mm | Width inner ring, upper tolerance |
| dUT | -0,01 mm | Bore diameter bearing, lower tolerance |
| BUT | -0,12 mm | Width inner ring, lower tolerance |
| dOT | 0 mm | Bore diameter bearing, upper tolerance |
| COT | 0 mm | Width outer ring, upper tolerance |
| CUT | -0,24 mm | Width outer ring, lower tolerance |
| Gr | 0 - 0,05 mm | Radial Clearance |
| Grmax | 0,05 mm | Radial clearance, maximum |
| Grmin | 0 mm | Radial clearance, minimum |
| 項目 | 代碼 | 說明 |
|---|---|---|
| 維護 | Maintenance free | |
| 密封 | 2RS | Lip seal on both sides |
| Bore lining | Without | |
| 塗層 | Without | |
| Fabric | ELGOGLIDE | |
| 材質 | Steel |
| 符號 | 數值 | 說明 |
|---|---|---|
| r1smin | 0,6 mm | 邊緣間距 |
| r2smin | 0,6 mm | 邊緣間距 |
| Damin | 38 mm | 外殼連接直徑 |
| damax | 34,2 mm | Connection measurement, inner ring |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -30 °C | 最低工作溫度 |
| Tmax | 130 °C | 最高工作溫度 |
- 徑向負荷
- 單向軸向負荷
- 雙向軸向負荷
- 終身潤滑，免維護
- 兩側密封
- 靜態角度誤差及不對中
- 動態角度誤差及不對中
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
GE30UK2RSAGE30 UK 2RS AGE30UK 2RS AGE30UK2RS AGE30 UK2RSAGE30 UK 2RSAGE30GE30UKGE30UK2RSINAGE30UK2RSAINA GE30 UK 2RS AINAGE30 UK 2RS A
