| 符號 | 數值 | 說明 |
|---|---|---|
| d | 200 mm | 內徑 |
| D | 270 mm | 外徑 |
| B | 80 mm | 寬度 |
| Cr | 540.000 N | 基本額定動負荷（徑向） |
| C0r | 1.210.000 N | 基本額定靜負荷（徑向） |
| Cur | 146.000 N | 疲勞極限負荷（徑向） |
| nG Grease | 670 1/min | 脂潤滑極限轉速 |
| ≈m | 13,6 kg | 重量 |
+82 70-7954-6116
info@kovar.kr
技術支援時間：週一至週五 9:00–18:00（韓國時間）
INA
INA SL04-200-D-PP-2NR 圓柱滾子軸承 200 × 270 × 80 mm
Cylindrical Roller Bearing
NT$18,013.49起
未稅ina:SL04-200-D-PP-2NRNT$18,013.49
| 規格 | 價格 | 數量 |
|---|---|---|
| ina:SL04-200-D-PP-2NR | NT$18,013.49 |
有庫存預計配送日期：2026.06.17（韓國庫存）
顯示價格為 EX-WORKS（國貿條規 2020）韓國首爾。運費、關稅及保險由買方承擔。
- Category
- 圓柱滾子軸承
- Dimensions
- 200x270x80mm
Overview
INA SL04-200-D-PP-2NR Cylindrical Roller Bearing is designed for high radial load capacity through line contact between rollers and raceways. It is suitable for rigid, heavy-duty applications such as motors, gearboxes, rolling mills, and machine tools, with N, NU, NJ, and NUP designs offering different axial locating functions.
Cylindrical rollers and a cage are arranged between inner and outer ring raceways. Depending on flange configuration, the bearing can be separable and may support axial load in one or both directions.
Key features
- High radial load capacity
- Rigid performance for high-speed operation
- Separable design for easier mounting
- Axial locating capability by design variant
Typical applications
- Industrial electric motors
- Gearboxes and reducers
- Machine tool spindle support positions
- Rolling mills, paper machines, and heavy machinery
Selection guidance
Choose the N, NU, NJ, or NUP design by load direction, axial locating requirement, cage material, internal clearance, and lubrication condition.
| 符號 | 數值 | 說明 |
|---|---|---|
| C | 79 mm | 外圈寬度 |
| C1 | 73,2 mm | Distance ring grooves |
| D1 | 264 mm | Diameter of groove |
| m | 5,2 mm | Width of groove |
| rmin | 0,6 mm | 最小倒角尺寸 |
| t | 1,8 mm | Chamfer width |
| X | 64 mm | Distance between rolling elements |
| 項目 | 代碼 | 說明 |
|---|---|---|
| 設計 | D | New outer Contour |
| 密封 | PP | Contact Seal on both sides |
| Holding Rings | 2NR | Two retaining rings included |
| 徑向內部游隙 | CN (Group N) | 標準內部游隙 |
| 公差等級 | PN | 標準 (PN) |
| 滾動體列數 | 2 | 雙列結構 |
| 符號 | 數值 | 說明 |
|---|---|---|
| Ca1 | 65 mm | Mounting dim for snap ring WRE (not included in delivery) Tolerance: 0/-0,2 |
| Ca2 | 63 mm | Mounting dim for retaining ring to DIN 471 (not incl. In delivery) Tol: 0/-0,2 |
| d1 | 227,5 mm | 內圈肋直徑 |
| d2 | 241 mm | 密封直徑（肋） |
| d3 | 292 mm | Outside diameter of snap ring WRE |
| d1 min | 227,5 mm | 軸肩最小直徑 |
| 30 ° | Chamfer angle | |
| -0,2 mm | Lower distance snap ring tolerance | |
| -0,2 mm | Lower distance retaining ring tolerance | |
| 0 mm | 卡環上偏差 | |
| 0 mm | 擋圈上偏差 | |
| 0 mm | Lower distance ring groove tolerance | |
| 0,2 mm | 環槽上偏差 |
| 符號 | 數值 | 說明 |
|---|---|---|
| Tmin | -20 °C | 最低工作溫度 |
| Tmax | 80 °C | 最高工作溫度 |
Also searched as
The same part number can be written with or without separators, or in progressive prefix form. We index these common variants so your search reaches this page:
SL04200DPP2NRSL04 200 D PP 2NRSL04200 D PP 2NRSL04200D PP 2NRSL04200DPP 2NRSL04 200DPP2NRSL04 200 DPP2NRSL04 200 D PP2NRSL04SL04200SL04200DSL04200DPP
